not dramatic news, but important operational improvements – 1. yesterday we shipped all the machines that were ordered the previous day. that means that some of those customers will receive their machines today, less than 48 hours after placing their…
typical, at lunchtime today this coffee was just on song in terms of really nice naked pours with no effort at all come to capture it tonight, and a very different story – hadnt touched the grinder settings, dumped the…
This roast does not have a lot of complex tastes going on That isnt to say it isnt nice, it is, but rather than appealing to the fruit club drinkers this will appeal to people who are just breaking into…
and if you look in this image, that i most definitely have posted recently you can see the crack in the PTFE guide ring on the bottom group there is also one on the other one i promise, but it…
here is the most common question i get asked when customers unbox their new machines i thought i had posted a blog entry on this in the dim and distant past but i must have done a poor job of…
Push the toggle to the locked open position in any direction and apply some lube to the exposed ball joint Then move the toggle around and around and back & forth the ensure the lube is worked over the entire…
this image shows what way-too-much lube on the driver looks like clean all the working surfaces fully with an effective solvent that does not leave an oily residue, leave to evapourate, relube the o-rings with just a sheen of lube…
Take care if the machine is on, or has recently been on, as it may be hot enough to burn your finger inside the valve body if you stick a finger in to fish out the spring
again, self explanatory – provided only to give re-assurance
remove with your fingertips the hardened steel bush so it doesnt fall out – it will come out very easily